Latest Updates

    Friday, 18 July 2014

    broadband internet settings

                                       

    Open Internet Explorer and in the Address Bar http://192.168.1.1
    Enter User Name : admin
    Password: admin
    Click OK

    You will get the web management window as below

    Click on Advanced

    Click on ATM / VCC
    You will See the list of PVC0 - PVC7 as below

    Click on Note of PVC3
    Change VPI / VCI from 3/35 to 0/45
    Click on Apply


    Click OK to save configuration and reboot .
    Click on note of PVC1
    Change the Virtual circuit from Disabled to Enabled
    Click on Apply


    Click on OK to save and reboot configuration.
    Click on note of PVC0 change :
    VPI / VCI to 0/35
    Virtual Circuit : Enabled
    WAN Settings : PPPoE/PPPoA
    Username : yourusername@dataone
    Password: yourpassword
    Click on Apply                               

    Your PVC list will now look as below.

    Click on Tools
    Click on System
    Click on Save and Reboot


    Click OK to save and restart.
    After your modem is restarted Click on Status and check the status of PVC0 and check if it is Connected.
    If "Not Connected " Check if you have entered USername and Password Correctly.

    • Blogger Comments
    • Facebook Comments

    0 comments:

    Post a Comment

    Item Reviewed: broadband internet settings Description: Rating: 5 Reviewed By: Unknown